Resetter Epson Stylus Office T1100
Resetter Epson Stylus Office T1100– Epson is a recognized brand for photo printers and high-end projectors. Epson is now striving to increase its presence in the segment of office printers. T1100 is an A3 office printer targeting home and SOHO users. Unlike the famous photograph of Epson printers, it does not provide high-quality photo printing, but excels in providing cost-effective printing solutions.T1100 which has a large footprint, but is quite compact for an A3 printer. The build quality is good, the height of the printer can be reduced by replacing the rear paper tray with a common front end connectivity front cassette.On printers feature PictBridge-only option. While we can understand the omission card slot but no Ethernet port shocking. To share in the access network, the printer must be connected to the print server.Epson Stylus Office T1100 uses 73HN and 103 ink cartridges, so it is very cost-effective. In our test T1100 produces 16 ppm in monochrome draft mode and 8.5 ppm color in draft mode. In normal quality mode it is printed in monochrome and 13 ppm in color 4ppm. When printing A3 size, yield 6 ppm in monochrome and about 4 ppm in color. Print quality remains good for a document while the photos are average. There is noise present in an image outputs of T1100 biggest advantage is the ability to scale a document directly to an A4 size. Of course, Microsoft Word can do the same but the scale directly without user intervention great. Overall the Epson Stylus Office T1100 is a cost-effective A3 printer that is nice with good output, the only drawback is missing an Ethernet port.
here’s how to reset this printer
1. All cartridges in apart and reassembled
2. 5x ink press
3. The green light is on and the printer is ready for use
If the yellow light is still too stubbornly fixed on the possibility of different problems, but also try the following manner:
1. Turn off the printer
2. Press the ink
3. then press the ink button while pressing the power button and do not release the ink button for 1-2 minutes and then release.
4. Let the printer reacts
5. Green light again and ready for re-use your printer.
Good luck and good luck.